Plumbing in Metro Manila
Licensed plumbers for pipe repairs, fixture installation, leak detection, and drain cleaning.
Based on real plumbing jobs booked through Taskly in Metro Manila.
About plumbing in Metro Manila
Most plumbing calls in a Metro Manila condo come down to a few repeat problems: a slow sink or floor drain, a running toilet, a dripping faucet, a loose water heater hose, or weak water pressure. A tubero, the local word for a plumber, can usually diagnose these in one visit if you describe the symptom clearly and show the fixture or pipe.
Start by checking whether the problem affects only your unit. If several units have low water pressure or the building drains are backing up, call the building admin before you book a tasker. Repairs inside the unit are usually your responsibility, but shared risers and main lines often belong to the condo corporation. Your tasker can tell you which side of the pipe the problem sits on.
What is included
- Diagnosis of the blockage, leak, or running fixture
- Clearing a sink, shower, or floor drain with a hand auger or pressure tools
- Replacing a faucet cartridge, toilet flapper, fill valve, or flush valve
- Sealing or replacing a leaking flexible hose, trap, or fitting
- Checking the water connections on a water heater (gas and electrical work are separate)
- Cleanup of the work area and a short explanation of what was done
Plumbing prices in Metro Manila
| Job | Typical range (PHP) | What changes the price |
|---|---|---|
| Diagnosis visit within Metro Manila | ₱300–₱800 | Call-out fee. Some taskers include diagnosis in the job price, so ask. |
| Unclog a kitchen or bathroom sink | ₱600–₱2,500 | Hand auger work. Grease buildup or a jammed pipe adds time. |
| Declog a floor drain or shower | ₱800–₱2,500 | Price rises if the drain must be taken apart or the job needs a second visit. |
| Toilet flapper, fill valve, or flush valve replacement | ₱500–₱1,000 | Labor only. Parts are usually ₱150–₱600 depending on brand. |
| Faucet cartridge or mixer replacement | ₱800–₱1,500 | Labor only. The faucet itself is bought separately. |
| Water heater hose or fitting replacement | ₱700–₱1,500 | Labor for a hose or fitting. A full water heater installation costs more. |
| Leak repair on an exposed pipe | ₱1,000–₱2,500 | Depends on access. Pipes inside walls or ceilings need opening, which costs more. |
Your tasker's quote is the price you pay. Ranges update as real jobs are booked through Taskly.
Be the first to book
We're onboarding verified taskers for plumbing in Metro Manila. Browse all taskers or check back soon.
How booking plumbing works
- Step 1
Describe the problem in the booking: the fixture, when it started, and whether water is running now.
- Step 2
Add a photo or a short video of the leak, drain, or fixture. A tasker can quote more accurately from a photo.
- Step 3
Confirm water access. Close the valve under the sink or the unit's main shutoff, and clear the space around the fixture.
- Step 4
Before the tasker leaves, check the fixture yourself. Run the tap, flush twice, and look under the sink for drips.
Tips for booking plumbing
- Know where your unit's shutoff valve is. A leak can cause more damage than the repair costs if you have to wait for help.
- Keep a bucket and towels ready. Many jobs release a little water when a trap or hose is opened.
- Ask the tasker to note the part brand and model they used. This helps with the next repair and with any warranty claim.
- Do not pour chemical drain cleaner before the visit. It can burn the tasker's hands and make the hand auger work harder.
- During the rainy season, check ceilings and corners for damp patches. A water stain above a bathroom often means a leaking pipe.
Plumbing in Metro Manila — FAQs
- How much does plumbing cost in Metro Manila?
- In Metro Manila, plumbing typically runs ₱600–₱2,500, averaging about ₱1,000. Taskly shows each tasker's hourly rate up front so there are no surprises.
- Are Taskly taskers in Metro Manila verified?
- Yes. Each tasker's government ID and NBI clearance is checked by the Taskly team before they're approved to quote. You can also see ratings and completed-task counts on each profile.
- How do I book plumbing in Metro Manila?
- Browse verified taskers, compare rates and reviews, pick the person you want, and book online — choose a time and pay by card. Taskly holds the payment and releases it to your tasker after the job is done.
- How do I pay, and are there fees?
- You pay by card through Stripe when you book — no cash needed. Posting and booking are free: you pay the agreed price, with no fee added at checkout.
- What is the difference between a repair and a replacement quote?
- A repair fixes the part that is failing, such as a washer, cartridge, or hose. A replacement swaps the whole fixture or a section of pipe. Replacements cost more because of the part and the extra labor. Ask the tasker to explain both options and which one they recommend for the age of the fixture.
- Who pays if the leak is coming from the unit above mine?
- That depends on the cause and the building's rules. Document the leak with dated photos, then report it to the building admin in writing. Taskly cannot decide liability between neighbors. The admin office and its complaint process are the right channel.
- Can a plumber work on a water heater?
- A plumber can check and reconnect the water side of a water heater, including hoses and valves. Gas connections need a licensed technician, and the wiring of an electric heater needs an electrician. Ask what the tasker is qualified to do before they quote.
- Why is the water weak only in the shower?
- Weak shower flow is often caused by a clogged shower head, a worn mixer cartridge, or a partly closed valve. If every tap in the unit is weak, check the building supply first. A tasker can test the pressure at your unit's inlet and tell you whether the cause is inside the unit.
- How long does a typical plumbing visit take?
- A simple fix such as a flapper or a sink clog often takes 30 to 60 minutes on site. Leak repairs that need access through a wall or ceiling can take half a day, and some need a second visit to dry and test. Ask for a time estimate in the quote.
- Should I buy the parts myself?
- You can, but check the model and size first. Bring the old part or a clear photo of it. Many taskers prefer to source parts because they know which brands fit. Ask whether the quote includes parts and whether the part comes with a warranty.