Electrical in Marikina
Certified electricians for wiring, outlet installation, lighting setup, and electrical troubleshooting.
Fair price guide
Low₱500Average₱1,100High₱2,000
Based on real electrical jobs booked through Taskly in Marikina.
Electrical prices in Marikina
| Job | Typical range (PHP) | What changes the price |
|---|---|---|
| Replace a wall outlet or switch | ₱500–₱900 | Labor only. Parts are usually ₱100–₱400 depending on brand and finish. |
| Install a ceiling light or fan on existing wiring | ₱700–₱1,600 | A fan that needs a new mounting brace costs more. Bring the fan and its hardware. |
| Fix a flickering light or loose connection | ₱450–₱1,200 | Includes diagnosis. Extra cable or a new fixture adds to the price. |
| Replace a circuit breaker, same rating | ₱800–₱1,500 | Breaker parts are extra. A new distribution board is a different job. |
| Add a new outlet on an existing circuit | ₱850–₱2,000 | Depends on how far the cable must run and whether walls need to be opened. |
| Panel upgrade or new circuit from the distribution board | ₱3,000–₱8,000 or more | Quote-based. Usually needs a PRC-licensed master electrician and a permit. |
Your tasker's quote is the price you pay. Ranges update as real jobs are booked through Taskly.
Be the first to book
We're onboarding verified taskers for electrical in Marikina. Browse all taskers or check back soon.
How booking electrical works
Compare verified taskers
See rates, ratings, and completed jobs up front.
Pick the person you want
Book instantly or post the job for quotes.
Pay by card, held until done
Taskly releases payment after the job — no cash.
Electrical in Marikina — FAQs
- How much does electrical cost in Marikina?
- In Marikina, electrical typically runs ₱500–₱2,000, averaging about ₱1,100. Taskly shows each tasker's hourly rate up front so there are no surprises.
- Are Taskly taskers in Marikina verified?
- Yes. Each tasker's government ID and NBI clearance is checked by the Taskly team before they're approved to quote. You can also see ratings and completed-task counts on each profile.
- How do I book electrical in Marikina?
- Browse verified taskers, compare rates and reviews, pick the person you want, and book online — choose a time and pay by card. Taskly holds the payment and releases it to your tasker after the job is done.
- How do I pay, and are there fees?
- You pay by card through Stripe when you book — no cash needed. Posting and booking are free: you pay the agreed price, with no fee added at checkout.
- Do I need a PRC-licensed electrician for every job?
- No. Small repairs, such as a switch, an outlet, or a fixture, can be done by a skilled electrician. Panel work, new circuits, and service upgrades are different. For those, ask for a PRC-licensed master electrician and check the license number. Taskly checks government ID and NBI clearance, which is not the same as a PRC license.
- What if my meter or the Meralco service line is damaged?
- Do not open the meter base or touch the service drop. Report the damage to Meralco, because only Meralco can repair or replace its meter and service line. A tasker can check the wiring on your side of the meter after Meralco has finished.
- Why does a breaker keep tripping?
- A breaker trips when a circuit draws too much current, a wire is damaged, or a device has a short. Common causes are an aircon or water heater on a shared circuit, a damaged plug, or moisture in a fixture. Repeated tripping is a reason to stop and have the circuit checked, not a reason to fit a bigger breaker.
- Can I install an aircon outlet myself?
- A dedicated aircon outlet usually needs the correct cable size, a matching breaker rating, and a properly grounded receptacle. Get a quote before you buy parts. An electrician can tell you whether the existing circuit can take the load, and whether the building admin requires a work permit first.
- How do I prepare the unit for an electrician visit?
- Clear the area around the panel, fixture, or outlet, and know which breakers control which rooms. Keep pets away from open boxes and tools. Tell the tasker whether the building needs a gate pass or work permit, and send it before the visit.
- Is it safe to work while the power is on?
- Electricians switch power off wherever they can and confirm a circuit is dead with a tester before they touch wires. Ask the tasker to switch off the relevant breaker before they start. If the job cannot be done with the power off, the quote should say so and explain the precautions.